Working on a fun 3D designed lamp for my uncle. I got some ribbon cable to hide the LED wires but I still need to workout where I want to add the supports and how to route it so it's nearly invisible.
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
Sneak peak of my largest installation to date, and that's not even half of it!
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
Woohoo, 3D-native LED animations! 
Made with unreleased version of https://blinksy.dev, a Rust LED library for embedded micros. 
(Music by @noiseissues )
All switches are connected to an #ESP32, which is connected to my #HomeAssistant over #ESPHome. I am just using a binary sensor. Like this I can do this very easily and it is nicer to integrate with lamps etc. The LED-Strip on my mic arm is powered by another ESP32 running #WLED by the way. The ESP gets its power even from the other ESP across the desk.
I really wanted to make a WLED version of the overpriced Goovee light bars but I wasn't wild about how difficult it was to construct and the overall diffusion of my design, not to mention the amount of work necessary to make sure it's perfectly straight. This next version will slot together much nicer, be easier to construct and wire, and should have some really nice diffusion effects on both sides!
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
My BFF wanted to have some light-up eyes for a costume that she's making, specifically ones that would react when she spoke. So I made her this little assembly, which holds some round LED boards a nice distance away from some LED black acrylic. I'm driving them with WLED running on an Adafruit Mini Sparkle Motion board so it can be powered off a battery pack. The built-in mic means she can have her voice-reactive eyes too!
https://www.printables.com/model/1320889-light-up-eyes-assembly
So it begins. At Lime St station in #Liverpool. Next stop Glasgow, then cycling the canal to Edinburgh #OHS2025
Think I'm visible enough? 
It's not 3D-printed, but @amcewen finally got his bike fitted out with a My Bike's Got LED kit.
Anyone would think we've got an event to go to later in the week.
Wow! That small idea worked out way more flashy than expected 
pimped up our artist's workshop a little last night... #theGoodHood #art #led #wled #ledmatrix
Today I designed and fabricated a new parametric spool to wind up my addressable fairy/pebble/seed LED light strands. This one holds 40 meters of lights which I use for trail lighting at outdoor events. I use it in conjunction with battery-powered WLED controllers for fun animated trail lights.
It's open source and free to download/remix here: https://www.printables.com/model/1300796-led-light-spool-customizable
M O O N... That's spells nearly done!
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
Finally making the epoxy moon lamp I've always wanted to make. 24v FCOB strip will go around the outside and epoxy will fill the moon shape. Should look wicked.
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
Fuck a tariff and fuck you if you support this bullshit.
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
sneak peak at Blinksy: a Rust LED library 
https://github.com/ahdinosaur/blinksy 
define 1D, 2D, and soon 3D spatial layouts use built-in visual patterns, or make your own drive APA102, WS2812B & more soon board support for Gledopto and soon QuinLED controllers desktop simulator for easy dev
Kleines #WLED Projekt bringt endlich Licht an den Badspiegel. Seit 3 Jahren hingen da Drähte über den Spiegel und ich habe keine vernünftige Lampe gefunden. Also von AliExpress fertige WLED Platine, BTF Led Stripes (IP65), ein Netzteil. Von Amazon die Profile. Vom Baumarkt Wandsteckdose, zwei Regalbretter, kleinere Sachen zum Befestigen. Etwas Löten, etwas Bohren, zurechtsägen, an die Wand pinnen fertig. WLED konfiguriert. Nun nur noch #Homeassistant mit Schalter verheiraten (#Zigbee).
Crowdfunding Success!
ANAVI Miracle Emitter kits are now shipping to backers!
Supports power input via USB-C or an external power source
Thank you for your support!
